Offset flail mower

The GEMACH hydraulic side-mounted mobile flail mower is very suitable for handling overgrown areas.

Key words:

Side mower

Ditch Bank Flail Mower

3 Point Flail Mowers With Hydraulic

Side Shift pto Grass Cutter

lawn Mower

flail Mowers For Compact Tractor

Mower Grass Cutter flail Mower 180 flail Mower Heavy Duty Hammer

New AGL Verge Flail Mower for Tractor

Flail Mower

Verge Flail Mower

Verge Flail Mower For Tractor

Classification:

Side mower

Service Hotline:

86-13465191540

Product inquiry

Product Introduction

The GEMACH hydraulic side-mounted mobile flail mower is ideal for handling overgrown areas.

This mower can be hydraulically shifted and tilted to reach hard-to-access areas. When used horizontally, the flail is perfect for cutting around and between trees. Equipped with heavier hammer flails and a gearbox for tougher grass and weed control, regular use of this flail mower can achieve fine mowing results when the length of grass and weeds is more manageable.

Product Features

1. Hydraulically adjustable head positioning for precise control.
2. Can cut vertically upwards at 90 degrees or downwards at 60 degrees.
3. Flail head cuts outside the tractor wheelbase.
4. Adjustable rollers with a cutting height range of 3-8 cm.
5. Spiral arranged hammer blades for high cutting efficiency.
6. Two blade options: (1) Y-shaped blade (2) Hammer blade
7. Equipped with a hydraulic system, mainly suitable for tractors with 18-60 horsepower.

8.Front safety chains keep out debris, sealed tapered roller bearings, and have brackets for easy storage when not in use.

Product Parameters

Model	VAM48	VAM60	VAM72	VBM78	VBM86
Power Required	25-50 hp	25-60 hp	70-100 Hp	80-110 Hp	90-120 Hp
Working Width	48in	60in	72in	78 in	86 in
Overall Width	56in	64in	79 in	94 in	101 in
Min. Blade Ground Clearance	0.6in	0.6in	0.6-1.4-2.2-3 in	0.2-0.9-1.7-2.4 in	0.2-0.9-1.7-2.4 in
Max. Cutting Diameter	1.5in	1.5in	3 in	6 in	6 in
Offset Distance From The Center (Maximum)	69in	77in	90 in	122 in	130 in
Tilt-Up Angle	90°
Tilt-Down Angle	60°		55°
Number Of Blades	20	24	18	18	20
Blade Type	Hammer
Size of Blades	3.5 x 3.2 x 1.6in
Blade Weight	0.9 lbs	0.9 lbs	1.8 lbs	2.6 lbs	2.6 lbs
Blade Material	Cast Steel	Cast Steel	Cast Steel	Cast Steel	Cast Steel
Rotor Bearing	SKF Bearing	SKF Bearing	SKF Bearing	SKF Bearing	SKF Bearing
Rotor Diameter	4.3in	4.3in	4.3in	5.5 in	5.5 in
Blade Swing Diameter	14in	14in	14in	14in	14in
Rotor Thickness	0.3in	0.3in	0.3in	0.5 in	0.5 in
Rotor Shaft Speed	2356 rpm	2356 rpm	2356 rpm	2356 rpm	2356 rpm
Hydraulic Fittings Size	G1/2 in
Hydraulic Hoses Quantity	4
Drive Type	Belt Drive
Spline End	1.375in Z6
Driveline Shaft Length	T6-LF-63 With Shear Bolt ; 63-77in [05B-1600]	T6-LF-63 With Shear Bolt ; 63in-77in [05B-1600]	T5-LF-63With Shear Bolt ; 63in-106in	T6-LF-73With Shear Bolt ; 73in-126in	T6-LF-73 With Shear Bolt ; 73in-126in
PTO Shaft Speed	540 rpm
Deck Thickness	0.16in	0.16in	2 in	2 in	2 in
Side Plate Thickness	0.25in
3-Point Hitch	CAT 1		CAT 2
Gearbox 0il Type	85W-90
Number of Belts	3		4
Belt Size	V Belt 17 x 991
Finish	Powder Coating
Warranty	1 Year
Dimensions (L x W x H)	56 x 27.5 x 28in	64 x 27.5 x 28in	90x39x31 in	100x41x31 in	109 X 41 X 31in
Weight (N.W./G.W.)	613/723 lbs	657/772 lbs	1235/1336 lbs	1848 /2040 lbs	1910 /2121 lbs