Laser leveling machine

Key words:

Laser Land Grader

Farm Land Leveler

Tractor Land Leveling

four Tire Laser Grader

farm Machine With Warranty

new Product Marketing

high Productivity Grader

laser Land Leveler

laser Grader For Tractor

grader Machine

Classification:

Satellite Grader

Service Hotline:

86-13465191540

Product inquiry

Product Introduction

The laser leveling machine mainly consists of a laser transmitter and receiver (which emits a rotating beam to form a reference plane, with digital display of slope at 360 degrees without dead angles), control box, hydraulic system, and leveling blade, with specialized tires for super strong grip. Principle: The laser transmitter emits a rotating beam that forms a light plane above the working area; this light plane serves as the reference plane for leveling the land. The laser receiver is installed on the telescopic arm of the loader. When the receiver detects the laser signal, it continuously sends signals to the control box. After receiving the signal, the control box corrects and controls the hydraulic valve to change the direction and flow of hydraulic oil to the cylinder, automatically controlling the height of the scraper blade; the controller features an LCD display that shows real-time digital land height differences.

Product Advantages

1. The laser leveling machine is mainly suitable for leveling operations on wasteland and sloped land, effectively distributing water resources by maintaining land levels and reducing irrigation ditches to improve land utilization.
2. No manual measurement of ground reference is required; through operation, ground flatness can achieve an error within 2cm, saving more than 30% water compared to ordinary irrigation.
3. Reinforced traction beam prevents breakage; hydraulic system automatically adjusts angle.
4. The design of combined valve body at oil pipe connection prevents oil leakage.
5. Specialized tires provide super strong grip; tread drainage groove design enhances wetland performance.
Measurement: Easily create field boundaries, internal points, and surface markers for fields. Calculate the actual size of measured fields.
Design: Use automatic leveling technology to create the most suitable field surface. Main slopes and cross slopes can be defined in specified directions with level changes; multifunctional leveling software shows advantages, data can be seamlessly transmitted back to GPS leveling systems.
Leveling: The hydraulic valve for scraper blades is fully automated to optimize soil movement in fields. When performing leveling operations in fields, combined deep loosening blades or dual-blade systems can be used to enhance productivity.

Product Parameters

Mode	Unit	GE-LG200	GE-LG250	GE-LG300	GE-LG350	GE-LG400
Working width	(mm)	'2000'	'2500'	'3000'	'3500'	'4000'
'Matched power'	(HP)	60-70HP	70-80HP	80-100HP	100-130HP	130-160HP
'Efficiency'	(h m²/h)	'1.1-1.6'	'1.3-1.8'	'1.6-2.0'	'1.9-2.3'	'2.1-2.5'
'Working speed'	Km/h	(5-15)
Working distance of the oi cylinder	(mm)	500
Buried depthofscraper into the soi	(mm)	240
Ejector/acceptor		NEDO/YD
Receiving controller operating voltage	V	11-30DC
Automatic leveling angle		±5
Signal reception angle	0	360
Flatness	Mm/100 m²	±15
Moldboard liftspeed	mm/s	LIFT≥50,Down≥60
Cylinder settlement	mm/h	≤12
Working dip angle	°	10±2
Hydraulicoil pressure	Mpa	16±0.5
Wheel-base	(mm)	1590	1790	1990	2190	2390
Wheel Type		235/75R15,235/85R16
Pressure	kPa	200-250
Structural style		Traction
Ambienttemperature	℃	5-40
Scraper Blade thickness	(mm)	9
Dimensions	(L)mm	3150	3150	3150	3150	3350
	(W)mm	2050	2550	3050	3550	4050
	(H)mm	3600	3650	3650	3650	3650
Weight	kg	600	820	960	1400	1600